Tailscale MCP Server - MCP Server

Tailscale Model Context Protocol (MCP) Server

A simple MCP server that provides read-only access to your Tailscale network directly from Claude Desktop and other MCP-compatible clients.

[!CAUTION] You might not want to do this! This server exposes your Tailscale network to an external application. It invokes the tailscale binary on your system on your behalf, assembling an argument list through string concatenation, and executing as your logged-in Tailscale account. While its operation is intended to be read-only and therefore "secure", you should be aware of the potential risks involved in exposing any part of your network to third-party applications. Especially when interacting with LLMs.

Description

This server allows, for example, Claude to interact with your Tailscale network by exposing read-only commands as tools and prompts. It enables you to:

Check your Tailscale status and connected devices
Get network diagnostics
View your Tailscale IP addresses
List available exit nodes
Ping Tailscale hosts
Look up information about Tailscale IPs

Requirements

Go (for building from source)
Tailscale CLI must be installed and accessible in your $PATH
An MCP-compatible client like Claude Desktop

Installation

Pre-built Binary

Coming soon

Building from Source

go install github.com/paulsmith/tailscale-mcp-server@latest

Using with Claude Desktop

First, make sure you have Claude Desktop installed and updated to the latest version
Open your Claude Desktop configuration file:
- macOS: ~/Library/Application Support/Claude/claude_desktop_config.json
- Windows: %APPDATA%\Claude\claude_desktop_config.json
Add the Tailscale MCP server configuration:

{
  "mcpServers": {
    "tailscale": {
      "command": "tailscale-mcp-server"
    }
  }
}

Make sure tailscale-mcp-server is on your $PATH, or provide the full path to the binary in the command field.
Restart Claude Desktop

Available Tools

The server exposes the following tools:

tailscale: Run any "safe" Tailscale command
get-ip: Get your Tailscale IP addresses
get-status: Get information about your Tailscale network
network-check: Check Tailscale network connectivity
list-exit-nodes: List available Tailscale exit nodes
ip-lookup: Look up information about a Tailscale IP
ping-host: Ping a Tailscale host
dns-status: Get DNS diagnostic information

The List of Safe Subcommands

The list of subcommands that are considered "safe" and can be run through the tailscale tool that this MCP server uses are:

netcheck
ip
dns status
status
metrics
ping <peer>
version
exit-node list
whois <ip>

Available Prompts

The server also includes several prompts to help with common tasks:

diagnose-network: Analyze Tailscale network connectivity issues
analyze-peers: Get a summary of devices in your tailnet
exit-node-recommendations: Get recommendations for exit nodes

Example Usage

Once connected to Claude Desktop, you can ask questions like:

"What's my Tailscale IP address?"
"Show me all the devices connected to my Tailscale network"
"Can you check if my Tailscale network connection is working properly?"
"Ping my device called 'laptop'"
"Are there any exit nodes available in my network?"
"What DNS settings is Tailscale using?"

Example Chat

Describe my tailnet and note anything out of the ordinary.

(Some content elided)

I'll check your Tailscale network status and provide you with information about
your tailnet. Let me run a few commands to gather the details.

First, let's check the overall status of your tailnet:

> View result from get-status ...

Now, let's get the Tailscale IP addresses:

> View result from get-ip ...

Let's check the network connectivity status:

> View result from network-check ...

Let's check for available exit nodes in your tailnet:

> View result from list-exit-nodes ...

Let's also check the DNS status:

> View result from dns-status ...

Based on all the information gathered, here's a description of your tailnet:

Your tailnet is named "orca-arctic.ts.net" and currently has 11 devices
registered, with 6 devices currently online and 5 offline. Your current device
is "venus" running macOS with the IP address 100.86.102.37.

Here's what I've observed about your tailnet:

- You have one device ("bunny") configured as an exit node. This allows other
  devices to route their traffic through it.
- There's a version mismatch between your client (1.80.3) and the tailscaled
  server (1.82.0), which could be worth updating to ensure compatibility and
  security.
- You have a device named "hello.ts.net" with a different user account (hello@)
  compared to your other devices (paulsmith@). This might be unusual if you're
  not expecting another user in your tailnet.
- Your network connectivity looks good with both IPv4 and IPv6 support, and
  you're using UPnP for port mapping.
- Your nearest DERP (Designated Encrypted Relay for Packets) server is in
  Ashburn with a 71.9ms latency, which is quite good.
- MagicDNS is enabled tailnet-wide, allowing you to reach devices by their
  hostname (e.g., venus.orca-arctic.ts.net).
- You're using NextDNS as your DNS resolver, which is a custom configuration.

Notable items that might need attention:

- The client/server version mismatch mentioned above
- The device "hello.ts.net" with a different user account (hello@) that might
  need verification if it's not expected
- Five of your devices are currently offline, which is normal if they're not in
  use but worth checking if you expect them to be online

Would you like me to provide more information about any specific aspect of your
tailnet?

Security Notes

This server allows read-only access to your Tailscale network
Only subcommands of the tailscale CLI in the "safe" whitelist are permitted
No configuration changes can be made (in theory!)
All commands are executed with your user's permissions
You are exposing your Tailscale network to an LLM, however indirectly via the MCP RPC, which is subject to security risks such as prompt injection - educate yourself

Troubleshooting

Server not appearing in Claude Desktop

Check the following:

Make sure the path to the binary in your configuration is correct
Verify Tailscale CLI is installed and accessible in your $PATH
Check Claude Desktop logs for errors:
- macOS: ~/Library/Logs/Claude/mcp*.log
- Windows: %APPDATA%\Claude\logs\mcp*.log

Command errors

If commands are failing, try:

Running the command directly using the Tailscale CLI to verify it works
Check that your Tailscale is correctly configured and connected
Ensure the command is in the allowed safe list

Development

This server is built using the mcp-go package. If you want to extend or modify it:

Clone the repository
Make your changes
Build using go build
Test with Claude Desktop or other MCP clients

Contributing

Contributions are welcome! Please feel free to open an issue and/or submit a pull request.

License

MIT License